Outdoor switchgear
AC 400V，50HZ，30-630A
Multistage capacitor: 2 3 4 5 level
OEM & ODM,Complete equipment
Send us your SLD (Single Line Drawing) or requirements ,we design switchgear plan for you
Product Introduction:
The integrated switchgear is integrated with power distribution/metering/protection/control/reactive power compensation function.This integrated distribution switchgear is extensively used in commercial and residential sectors for low voltage distribution applications. Before offering to the clients, this integrated distribution cabinet is stringently tested in order to ensure its flawles performance. Comply with standard IEC60439
Service environment
1.Air temperature: -25℃---+40℃
2.Humidity: Monthly average humidity 95%; Daily average humidity 90% .
3.Altitude: ≤ 2500m
4. Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
5. No frequent violent shake
Feature
XC electric JP integrated distribution cabinet enclosure was made of 2mm high quality stainless steel plate after multiple bending flanging process ( flame retardant, environmental protection, heat insulation, anti-condensation performance), using special stainless steel welding process, the overall strength after molding, the surface smooth as a mirror, do not leave weld marks ; internal installation of beam (plate) for the hot galvanizing process, to ensure that the twenty years do not rust; the front and rear doors, easy operation and maintenance, the door was edged with high elastic aging sealant, each door is equipped with two types of lock, padlock with anti-rain cover wall rust; whole closed with a sealing device measuring room; the s ide of the box is equipped with cable lines into the proof of foreign body wear tube, bottom ventilation holes and the cable outlet hole is arranged at the top of ventilation and screen, waterproof Anti rust, dustproof, anti-foreign object function, protection grade: lP54.
Main Parameter
NO. | Description | Unit | Parameter |
1 | Rated voltage | V | 400 |
2 | Rated frequency | HZ | 50 |
3 | Capacity | KVA | 30 50 63 80 100 125 160 200 250 315 400 500 630 |
4 | Capacitor grouping |
| 2 3 4 5 level(according to user requirements ) |
5 | Bus bar Rating | A | 630 |
6 | Metal used for busbars |
| Copper |
7 | Typ e of protection used on busbars against corrosion (e.g. heavily tinned) |
| Tinned Plating |
8 | Dimens ions of busbars (length x width x thickness) | mm | 660 x 50x 5 |
9 | Method of connection between busbars and cable lugs (cable lugs not to be provided) |
| Bolted Typ e
|
10 | Fixing centre of HRC fus e | mm | 90 |
11 | Ar e safety barriers fitted between phases of the s ame incoming or outgoing unit? |
| Yes |
12 | Are insulating shields fitted between adjacent units? |
| No |
13 | Minimum clearance between the lowes t cable connection and ground level | mm | 300 |
14 | Material used for housing |
| Ho t Dipped Galvanized Sheet |
15 | Treatment of housing against atmospheric corrosion |
| 7 Tank Process |
16 | Padlocking facility on housing door |
| Yes |